Frequently Asked Questions About Custom Car Covers in Australia
We Got You Covered Australia makes fully custom car covers for cars, utes, 4WDs, motorcycles, boats, and jet skis. Every cover is precision-fitted to your vehicle’s exact dimensions and shipped free across Australia from our Melbourne base. If you have questions about materials, fitment, care, ordering, or which cover best suits your vehicle and storage conditions, you will find the answers below. If your question is not covered here, contact our team directly and we will get back to you promptly.
1. Do car covers scratch or damage paint?
No, a properly fitted car cover with the right inner lining will not scratch your paint. The key is the lining material. Our custom indoor satin covers use a soft fluffy fleece inner layer that sits against your paintwork without friction. Where paint damage does occur is with low-quality universal covers that use rough polyester lining and sit loosely on the vehicle, allowing the material to rub against the paint surface every time wind moves the cover. A fleece-lined, custom-fitted cover eliminates both problems. It sits correctly, does not shift in the wind, and the fleece layer acts as a protective buffer between the fabric and your paint.
2. How much do custom car covers cost in Australia?
Custom car covers in Australia typically cost between $250 and $650 depending on vehicle type and cover material. At We Got You Covered, our indoor satin car covers start at $450, outdoor waterproof PU leather covers are $600, indoor ute covers are $470, motorcycle covers start at $249, and boat covers are $550. These prices reflect precision custom manufacturing to your vehicle's exact dimensions, a 2-year warranty, and free shipping Australia-wide. Universal covers cost less upfront but do not fit correctly, which means reduced protection and higher risk of paint damage over time.
3. What is the difference between an indoor and outdoor car cover?
Indoor and outdoor car covers are made from different materials for different protection purposes. Indoor covers use breathable satin fabric with a soft fleece lining. They protect against dust, micro-scratches, and light abrasion while your vehicle is stored in a garage. They are not waterproof and should not be used outside long-term. Outdoor covers use waterproof PU leather with UV coating and wind tie-down straps. They protect against rain, UV fade, bird droppings, hail, and dust for vehicles parked in driveways, carports, or open areas. The right choice depends entirely on where your vehicle lives when it is not being driven.
4. Are custom car covers actually worth it compared to universal covers?
Yes, for most Australian vehicle owners a custom cover delivers noticeably better protection and longevity than a universal cover. Universal covers are cut to approximate size ranges, which means they leave gaps at the mirrors, bonnet, and boot. Those gaps allow dust, moisture, and UV to reach the paintwork. They also create wind lift, which causes the cover to rub against the paint surface repeatedly. A custom cover is cut to your specific vehicle's measurements so there are no gaps, no wind lift, and no loose material. For classic cars, high-value vehicles, or anyone storing a vehicle for extended periods, the difference in paint condition over 12 months is significant.
5. Can I get a car cover made for a ute, 4WD, or SUV?
Yes. We Got You Covered Australia makes custom covers for utes, 4WDs, and SUVs in addition to standard passenger cars. Our indoor ute cover fits popular models including the Toyota HiLux, Ford Ranger, Mitsubishi Triton, Holden Colorado, and Nissan Navara. For 4WDs and SUVs, we make covers for the Toyota LandCruiser, Prado, Nissan Patrol, Land Rover Defender, Mitsubishi Pajero, and Jeep Wrangler among others. Every cover is made to your vehicle's exact measurements including modifications like roof racks or canopies. To order, contact us with your vehicle make, model, year, and any modifications and we will manufacture a cover to fit.
6. What is the best material for a car cover in Australian conditions?
For outdoor use in Australia, the best material is UV-resistant waterproof PU leather with a soft fleece inner lining. Australia's UV index is among the highest in the world and standard polyester outdoor covers degrade faster under sustained UV exposure. PU leather with UV coating handles heat, sun, rain, and coastal salt air without cracking or fading at the rate cheaper materials do. For indoor or garage storage, breathable four-way stretch satin with a fleece lining is the best choice. It allows moisture to escape, preventing mould or condensation buildup under the cover, while the fleece lining stops micro-scratches from dust particles trapped between the cover and the paint.
7. Can I get a custom logo or design printed on my car cover?
Yes, We Got You Covered Australia offers custom logo printing on both indoor and outdoor covers. You can have your personal logo, vehicle badge, club insignia, or any custom artwork applied to your cover during the manufacturing process. Several of our customers have ordered covers featuring marque-specific branding including Monaro, HSV, and Mustang designs. The logo is incorporated into the cover before it is finished, not applied as a sticker or patch after the fact. To get started, contact us with your logo artwork file and we will advise on sizing, placement, and colour options relative to your chosen cover colour. Custom logo covers are popular as gifts and dealership presentation covers.
8. How do I measure my car for a custom cover?
You do not need to measure your car yourself. When you order from We Got You Covered, you provide your vehicle's make, model, year, and any modifications such as a non-retractable aerial, spoiler, or roof rack. We use manufacturer dimension data combined with your modification details to produce a cover fitted to your exact vehicle. If your vehicle has non-standard modifications that affect the body profile, our team will ask follow-up questions before manufacturing. This process means every cover arrives ready to fit without adjustments. If you are ordering for a heavily modified or custom-built vehicle, contact us directly before placing an order so we can discuss your specific requirements.
9. How long does a custom car cover last and how do I look after it?
A quality custom car cover typically lasts three to seven years depending on material, usage frequency, and how well it is maintained. Our indoor satin covers are machine washable at 30 degrees Celsius on a gentle cycle and should be hung to dry, never tumble dried. Our outdoor PU leather covers should be hosed down with cold water and allowed to air dry before storage. Do not fold a wet cover and store it in a bag as this causes mildew. Avoid using high-pressure washing directly on the stitching. All covers from We Got You Covered include a 2-year warranty covering manufacturing defects. With correct care , most customers report covers lasting well beyond that period.
10. Do you ship car covers Australia-wide and how long does delivery take?
Yes, We Got You Covered ships custom car covers to all states and territories across Australia at no additional cost. Standard delivery from our Melbourne base takes between 5 and 14 business days from the date your order is confirmed and manufactured. Because every cover is made to order rather than pulled from shelf stock, there is a manufacturing lead time before dispatch. Customers in regional areas should allow for the upper end of the delivery estimate. We ship to metro and regional addresses in New South Wales, Victoria, Queensland, South Australia, Western Australia, Tasmania, the ACT, and the Northern Territory. International shipping is also available, with one recent order fulfilled to the Czech Republic. If you have any questions, please contact us .